AOC e2043f - Manual (Page 13)

13
Wall Mounting
Preparing to Install An Optional Wall Mounting Arm.
This monitor can be attached to a wall mounting arm you purchase separately.
Disconnect power before this procedure. Follow these steps:
1
Place monitor on the firm surface (such as, table)
2
Use your hands to hold the monitor base
3
Use your hands to fold the monitor base as figure instructed above by switch
safety lock to the right side
4
Once the monitor base begin to fold you can release the safety lock (caution: you
must hear “click” after you fold the monitor base to wall mount position to
ensure safety lock is lock properly.)
5
Follow the manufacturer's instructions to assemble the wall mounting arm.
6
Place the wall mounting arm onto the back of the monitor. Line up the holes of
the arm with the holes in the back of the monitor.
7
Insert the 4 screws into the holes and tighten.
8
Reconnect the cables. Refer to the user's manual that came with the optional
wall mounting arm for instructions on attaching it to the wall.
Noted : VESA mounting screw holes are not available for all models, please check
with the dealer or official department of AOC.