AOC 2236Vwa - Manual (Page 13)

13
Connecting the Monitor
Cable Connections On Back of Monitor and Computer:
1. Power
2. Analog (DB-15 VGA cable)
3.Audio
4.DVI
To protect equipment, always turn off the PC and LCD monitor before connecting.
1 Connect the power cable to the AC port on the back of the monitor.
2 Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the
computer's D-Sub port.
3 Connect the audio cable to audio in port on the back of the monitor.
4 (Optional ± Requires a video card with DVI port) - Connect one end of the DVI cable to the back of the monitor
DQGFRQQHFWWKHRWKHUHQGWRWKHFRPSXWHU¶V'9,SRUW
5 Turn on your monitor and computer.
If your monitor displays an image, installation is complete. If it does not display an image, please refer
Troubleshooting.