Setting the record speed, Setting voice activated system recording (vox), Operation – COBY electronic CX-R60 User Manual

Page 13

Advertising
background image

Page 1

Coby Electronics Corporation

www.cobyusa.com

Page 1

Setting Voice Activated System Recording (VOX)

Set the VAS switch to the OFF position to record from the microphone
continuously when recording.

Set the VAS switch to the ON position to record from the microphone
only when sound is detected.

The beginning of the recording may be clipped slightly when

VAS is active.
The recorder will pause automatically after 2 to 6 seconds of si-

lence. A change in speaking volume will not cause the recorder
to pause. Set the Pause switch to the “ON” position to pause
recording manually.
A distance of approximately 8 inches should be maintained be-

tween the speaker and the integrated microphone at normal

speaking levels.
The integrated audio level detector will set the recording sensi-

tivity automatically when VAS is active.

OPERATION

Advertising