AOC LE24H067 - Manual (Page 11)

10
Controls & Connections
Speaker Speaker
Power Indicator
IR Receiver
Volume +
Volume -
Channel
Channel
Menu
Input
Power
1. VOL + Press to increase the sound volume level.
2. VOL - Press to decrease the sound volume level.
3. CH ▲ Press to select the next higher program number.
4. CH ▼ Press to select the next lower program number.
5. MENU
Press to open or exit the OSD (on-screen display)
menu.
6. INPUT Press to select the input source.
7. Power Press to turn on / off (standby) the TV set.
HDMI 1
HDMI 2
U
S B
SPDIF PC In
USB/Service
HDMI 2
Headphone Jack
HDMI 1 Component In S-Video
VHF/UHF Cable In
AV in L-Audio-R
Item Description
Headphone Jack
Connects to your headphones. If your headphones do not match the jack, use a suitable plug adapter (not
supplied). While headphones are connected, the TV speakers are muted.
SPDIF *
(Optical Digital Audio Out)
Connect an external sound system with optical cable to the SPDIF out jack on the back of your TV to the SPDIF
IN jack and to the amplifier or receiver.
AV IN (AV/S-VIDEO) /
L-AUDIO-R
Connects to the COMPOSITE VIDEO output or S-Video output jack from your video equipment that has
COMPOSITE or S-Video VIDEO, and audio (L/R) jacks can connect audio source to your TV. When connected,
S-Video will take priority over Composite video (Yellow jack).
USB/Service Insert USB storage device to the USB 2.0 port to view photos (JPEG only).
S-VIDEO Input
Connects to the S-VIDEO output jack on your camcorder or other video equipment that has S-VIDEO. The
S-VIDEO provides better picture quality than composite video. The audio input connector was shared with
COMPOSITE VIDEO IN.
HDMI IN 1/ 2
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital audio/video interface between
this TV and any HDMI-equipped audio/video equipment, such as a set-top box, DVD player, Blu-ray Disc player,
A/V receiver as well as PC. HDMI supports enhanced, or high-definition video, plus digital audio.
If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the HDMI IN (with DVI-to-HDMI
cable or adapter) jack, and connect the audio jack to the PC AUDIO IN jacks of HDMI IN.
DVI-to-HDMI cable DVI-to-HDMI adapter
HDMI connection is necessary to view 480i, 480p, 720p, 1080i and 1080p formats.
Be sure to use only an HDMI cable that bears the HDMI logo.
PC IN (RGB/AUDIO)
Connects to a personal computer’s video output connector using HD15-HD15 cable (analog RGB). Can also be
connected to other analog RGB equipment. See “PC Input Signal Reference Chart” on page 15 for the signals that
can be displayed.
For some Apple Macintosh computers, it may be necessary to use an adapter (not supplied). If this is the case,
connect the adapter to the computer before connecting the HD15-HD15 cable.
If the picture is noisy, flickering or not clear, adjust Phase and Pitch of Screen settings.
Component IN
(1080p/1080i/
720p/480p/480i)/
L-AUDIO-R
Connects to your TV’s component video (YPbPr ) and audio (L/R) jacks. Component video provides better picture
quality than the S-VIDEO or the composite video connections. Component video (YPbPr) connection is necessary
to view 480i, 480p, 720p, 1080i and 1080p formats.
VHF/UHF/Cable Input
RF (Radio Frequency or modulated signal design used as the carrier for television broadcasts.) input that
connects to your Cable or VHF/UHF antenna.
* SPDIF
Sony/Philips Digital Interconnect Format. S/PDIF is mostly used to transmit compressed multichannel audio from a media player to an amplifier/receiver.