En gli sh, Installation, Connecting rf antenna and cable tv – AOC LE24H060 User Manual
Page 16: Connecting to dvd / set top box
15
INSTALLATION
Connecting RF antenna and Cable TV
Make sure the power is OFF before installing your
LED-LCD TV.
1) AIR TV: Connect the
LED-LCD TV to TV antenna with 75-ohm coaxial cable. Preset the air TV
channels into memory with Auto Scan function when using an antenna TV system. This air
input jack both support TV and DTV systems. Besides, the TV system (NTSC) and DTV
system (ATSC) can be found by the scanning of “AIR” with Auto Scan function. See page 35.
2) Cable TV: Connect the
LED-LCD TV to the cable with CATV and Digital cable. Preset the cable
TV channels into memory with Auto Scan function when using a cable TV system. The cable
input jack both support CATV and Digital cable systems. Besides, the CATV system (cable TV)
and Digital cable system (clear QAM) can be found by the scanning of “Cable” with Auto Scan
function. See page 35.
Note: Users can select either Air or Cable TV cable to be connected to the TV IN jack. To
watch both of them, use an adapter to connect both Air and Cable cables to the jack.
Connecting to DVD / Set Top Box
Connect Video/Audio cables from compatible devices into the back panel of
LED-LCD TV.
1) With AV cable:
RF Cable, CATV/ Digital cable
or Adapter (not supplied)
VCD or DVD Player
RCA A/V Cable (not supplied)
En
gli
sh