AOC L22W831 - Manual (Page 32)

30
1.Program No.: Shows the current channel number.
2.Tuning mode: Select the mode of TV signal as Cable or Air.
3.System standard: Can set as NTSC-M, PAL-M or PAL-N. Advise please do
not change this item after auto search action.
4.Auto search: Select "Auto Search" to search all signaled channel; when the
searching is complete, it stays at the first channel with signal and all channels that
have been located are stored. If you would like to stop "Auto Search" during the
process, simply by pressing the MENU or EXIT button.
5.Fine tuning: Fine tune the frequency of current channel.
6.AFC: AFC can be set to ON or OFF. Set to ON, the TV will search signal
automatically; when there is any offset in the signal, will automatically adjust the
channel to the correct frequency.
7.Skip: Skip can be set to ON or OFF. When it is set to ON, a channel can be
skipped by pressing the switching button on the remote control or on the front
panel.
System Menu (
1.Menu language:There are four language options provided - English, French,
Spanish and Portuguese.
2.Menu timeout:
Adjust the time of menu display.
3.Sleep timer: Function with which you can set a time period after which the TV
should turn itself off.You can set it as 5, 10,15.30,45,60,90,120,180,240 and Off.
4.Menu background:Adjust the background of OSD menu. The tuning range is 0
~ 100.
5.Closed caption:Select CC channel as CC1~CC4,TT1~TT4 or Off.
6.Reset:
Restore the default System settings.
7.Reset all:Reset all OSD setting to default value.