AquaCraft AQUB9540 Water Jacket Installation Procedure User Manual
AquaCraft Water equipment
Advertising
Installation of the AquaCraft AQUB9540 water jacket onto a 36mm brushless
electric motor.
Parts and simple tools include:
Block of wood, popsicle stick and oil.
1.
Drill a 13/64” (but any size large enough for the shaft will work) hole in a block of
wood. (old 123 blocks work good here too)
2.
Slip the motor shaft into the hole and
stand the motor on end.
3.
Place oil near o ring
Advertising