Audio Note CDT-0 User Manual
Page 8
- -
8
TROUBLESHOOTING GUIDE
Refer to the relevant sections in the manual for remedy suggestions.
SYMPTOM
CHECK POINT
No sound from the CD player.
CD is not selected on the amplifier.
The disc tray does not close.
The disc is not loaded or seated properly into the
disc tray.
Playback does not start.
The disc is dirty.
The disc is upside down.
The player is in the PAUSE mode.
Moisture condensation has caused the unit to
operate incorrectly.
“NO DISC” appears.
There is no disc loaded or the disc is loaded
incorrectly.
Playback does not start from the first track.
The player is in the PROGRAM or RANDOM
mode. Press the STOP (
n) button to cancel the
programme.
SPECIFICATIONS
AUDIO CHARACTERISTICS
Frequency response:
10 Hz - 20 kHz (+0.5 dB)
Signal-to-noise ratio:
More than 85 dB
Wow and flutter:
Below measurable limit
Channel separation:
More than 80 dB
Output voltage
2 V RMS
DIGITAL SIGNAL PROCESSING
Optical pick-up:
3-beam laser
Semi-conductor laser
780 nm
D/A conversion:
∆Σ
Sampling frequency:
44.1 kHz
Power source:
AC 220-230V 50/60 Hz
Fuse:
230V – 500 mA Anti-surge
120V – 500 mA Anti-surge
Dimension (with panel):
220 (W) x 120 (H) x 300 (D) mm
Weight:
4kg
Power consumption:
8W
-7-