Audio Note CDT-4 User Manual
Page 7
6
PROGRAMMING
You may select a number of tracks and store them in the memory in the desired
sequence. The transport will then play back only your selection of tracks in the selected
order.
1
Press the MEMORY button. 'MEMORY' will appear on the display.
2
Press the CD SKIP or numbered buttons - To select the desired track to be stored.
3
Press the MEMORY button - The track is now stored in the memory.
Repeat steps 2 and 3 to complete programming.
4
Press PLAY to listen to the programmed tracks.
5
Press STOP once to stop playback.
6
Press STOP second time to clear programming.
A maximum of 32 tracks may be stored.
A particular track in your selection may be replaced with a new one if the original
selection was made in error. Simply store the new track in the program number to be
replaced.
NOTE: Programming may not be made during playback.
TIME button. Press this button to see the elapsing or remaining time of the CD.
(Play mode only.) Press the TIME button and select the desired TIME DISPLAY for CD
playback.
Each time this button is pressed, selection is as follows:
"EACH REMAIN"
the elapsed playing time for the current track.
"TOTAL"
the total elapsed playing time.
"TOTAL REMAIN"
the remaining playing time for the current track.
REPEAT button. Press this button to listen to the music repeatedly. First press to
repeat the entire disc. Second press to repeat displayed flashing track.
RANDOM button. Press this button for random order playback.
NUMBERED buttons. A particular track may be selected for playback by using these
buttons. Example:
To play track ' 3', press the button ' 3' once.
To play track '14', press the button “1” and "4".
To play track '20', press the button "2" and "0".
DISPLAY button. Press this button to change the intensity of display or to turn it
on/off.
Press the DISPLAY button once to reduce the intensity of the display. Press the
DISPLAY button twice to turn the display off. To turn the display on, please DISPLAY
button once again.
Supplied remote control handset can operate Audio Note preamplifier:
VOL +
Press this button to turn the volume up.
VOL -
Press this button to turn the volume down.
INPUT + -
Press one of these buttons to change the input.
MUTE
Press this button to mute the sound.