Audio Note CDT-6 / Force - Manual (Page 5)

4
Connections:
Digital output connector on the back of CDT Six unit provide a digital output for
connection to your DAC via your digital interconnect with RCA connectors. Your dealer can
advise on suitable type and quality of cable eg: - Audio Note digital SOOTTO is an excellent
choice.
Power inputs: please use the 3 supplied power cables to connect the CD transport unit
to the power outputs of the CDT Six Force power supply unit:
Mains connector on the back of the CDT Six Force : An IEC power connector is available
for connection to the mains using the supplied mains cable. For further improvement is sound,
we recommend to use Audio Note SOGON mains cable.
Mains switch is located on the back of the CDT Six Force just above the mains socket
and turns both units ON / OFF.
The transport's sonic performance will start to improve as the internal parts 'bed' in.
The transport requires about 400-600 hours of operation before the bedding in process is
complete.