Audio Note Tomei Kensei - Manual (Page 11)

Line inputs Being a stereo power amplifier, the TOMEI Kensei is fitted with a pair
of XLR / Balanced input sockets. Looking from the front of the
amplifier, they are located towards the front of the left hand side panel.
Connect the outputs from your preamplifier to these inputs.
Ground Post A ground post is provided for connection to those source components
that also use a separate ground terminal.
Speakers
Each channel is equipped with 2 colour coded binding posts for
connection to your speakers.
Looking from the front of the amplifier, the 2 binding posts to the left
are for the left channel and the 2 binding posts to the right are for the
right channel.
Connect the amplifiers black speaker output binding post to the black /
negative terminal (also marked “ – “) on the speaker.
Connect the amplifiers red speaker output binding post to the red /
positive terminal (also marked “ + “) on the speaker.
Mains
The TOMEI Kensei uses an IEC 320 mains inlet socket. Use the
supplied mains cable to connect the unit to the local mains supply.
The mains fuse and a spare are located in the inlet socket fuse
drawer.
Special Note – Make sure that all connections are tight and clean. For
best results use good quality audio interconnects. Although it is
perfectly acceptable to use cables manufactured by other companies,
for best results and performance, we recommend our own Audio Note
(UK) range of interconnects and loudspeaker cables. For further
information, please consult your nearest Audio Note (UK) dealer, or
alternatively please feel free to contact us directly.
CONNECTION