Audio Note AZ-Three Speaker User Manual
Page 8
Once a suitable position offering the most acceptable bass and stereo presentation
has been found, make sure the loudspeakers are level and securely positioned. The
use of a spirit level for accurate levelling is advised.
Adjust the spikes in the base of each loudspeaker, making sure that all four are
contacting with the floor and that the enclosure does not ʻrockʼ or ʻwobbleʼ.
If the loudspeakers are positioned on a carpeted floor, make sure that each spike
thoroughly pierces the carpet and makes contact with the solid floor surface beneath.
Lock the spike in position with the lower locking nut. ʻFinger tightʼ is usually enough,
but feel free to use an appropriately sized spanner / wrench to lock the nuts in place.
If you experience any difficulty positioning your AZ-THREE satisfactorily, please
consult your Audio Note (UK) Dealer, who will be happy to assist you. Alternatively,
please contact us directly.
As we design all our speakers to be primarily used with good valve amplification the
AZ-THREE will always perform at its best when partnered with a suitably composed
Audio Note (UK) system.
However, it will also give good results when partnered with a wider range of valve and
transistor amplifiers.
UNPACKING AND INSTALLATION continued…