Io limited installation continued – Audio Note IO Limited User Manual
Page 12
To achieve correct cartridge alignment, it will be necessary to use the alignment
protractor provided with your tonearm. If in doubt, contact your tonearm
manufacturer, or contact you Audio Note (UK) dealer, who will be able to advise you.
It is also important to make sure that the top surface of the cartridge is mounted
parallel to the surface of the record, when viewed from the front and side. These
adjustments – referred to as Azimuth and Stylus Rake Angle – will have a noticeable
effect on tonal and channel balance, and every effort should be made to accurately
adjust these settings.
Once the final cartridge alignment adjustments have been completed, check the
tracking weight again, to ensure that it is correctly set at
2.5g
.
You are now ready to enjoy your record collection!
TOP SURFACE OF CARTRIDGE BODY SHOULD BE PARALLEL WITH RECORD
SURFACE, WHEN VIEWED FROM THE FRONT AND SIDE.
IO LIMITED INSTALLATION continued…