Audio Note Speaker Foam Replacement - Manual (Page 2)

Woofer Foam Surround Replacement Procedure for Audio Note™ AN-K, AN-J & AN-E
Speaker Models
Whilst we are happy to advice on all matter relating to our products, it must be understood that we
cannot be responsible for mistakes or damage caused by anyone trying to follow this set of
instructions.
Whether you have removed the driver from the cabinet or it is still in situ the procedure is the same,
make a break in the foam and gently peel it off the paper cone as shown on the pictures without
tearing the cone itself, if the foam is very brittle you may need to use a very sharp knife or scalpel to
gently remove all remnants of the old foam from both paper cone and the metal basket.
Picture 2