Avlink AV-E32 - Manual (Page 6)

REMOTE FRONT VIEW
AV-R/AV-R-PRO
1. Power LED
2. CAT.5 (RJ-45 Connector)
REMOTE REAR VIEW
AV-R/AV-R-PRO
1. VGA Output (HD-15 Female Connector)
2. AUDIO Output
3. EQ – Equalization length adjust (Adjust it and weak characters be sharp)
4. GAIN – Adjust brightness
5. Input Power Jack
Installation
1. Turn off the PC.
2. Connect AV-Extender local unit HD-15 female input connector with HD-15 male to male cable from PC.
3. Connect the audio input connector at local unit of AV-Extender with audio cable from PC.
4. Connect the mic input connector at local unit of AV-Extender with mic cable from microphone.
5. Connect AV-Extender local unit HD-15 female output connector with HD-15 male to male cable from monitor.
6. Connect AV-Extender local and remote unit with CAT.5 cable.
7. Connect AV-Extender remote unit HD-15 female connector with HD-15 male to male cable from monitor.
8. Connect the audio output connector at remote unit of AV-Extender with audio cable from audio amplifier.
9. Connect the power cord on each side.
10. Turn on the monitor and PC and audio amplifier.