Avlink VGA-ED8W - Manual (Page 6)

REMOTE REAR VIEW
VGA-RDW/VGA-RDW-PRO
1. VGA Output (HD-15 Female Connector)
REMOTE TOP VIEW
VGA-RDW/VGA-RDW-PRO
1. EQ – Equalization length adjust (Adjust it and weak characters be sharp)
2. GAIN – Adjust brightness
Installation
1. Turn off the PC.
2. Connect VGA-Extender Local Unit HD-15 female input connector with HD-15 male to male cable
from PC.
3. Connect VGA-Extender Local Unit HD-15 female output connector with HD-15 male to male cable
from monitor.
4. Connect VGA-Extender Local and Remote Unit with CAT.5 cable.
5. Connect VGA-Extender Remote Unit HD-15 female connector with HD-15 male to male cable from
monitor.
6. Connect the power cord on each side.
7. Turn on the monitor and PC.
Auto EDID Copy Operation
When the user reconnects the CAT.5 cable between the local and remote unit, the VGA-Extender will
start to copy EDID from remote Monitor to local unit.
And local unit will save the EDID content from the remote monitor even when the VGA-Extender
re-power.
The VGA-Extender will update the EDID content, when the remote monitor’s EDID is different with the
EDID in the memory of the VGA-Extender.
**note: When remote unit connects a new monitor, it needs re-connect the VGA cable between the local
unit and PC, so that some windows system (like Windows 7…etc) start to require the EDID content
from local unit. After that, the windows update the monitor information.
*note: When there is no connection between the local and remote unit, the local unit will use the EDID
content of the local monitor to the PC.