Avlink HX-2344 - Manual (Page 7)

Matrix Switching System—User Manual
6
ƒ OUT 1~4 keys (output channel): Indicate the Channel 1~Channel 4 for HDMI singal
output to peripheral display. You can also use these keys to adjust the status or access
the settings
ƒ IN 1~4 keys (input channel): Indicate the Channel 1~Channel 4 for HDMI singal input.
You can use these keys to switch to the connection of the connected signal source
channels.
ƒ IR1: Infrared receiver.
ƒ All: This key allows you to set single input channel to all output channels.
- Press the “All” key.
- Select the one of the IN 1~4 keys.
- The selected IN x key will deliver the singal to all output channels.
- You can also press the “All” key and then the “OFF” key to disable all the
displayed switching settings.
ƒ OFF: Disable the entire output channels. Press the one of the OUT x keys that you
want to disable the output channel, then press the OFF key. You can also press the
“All” button and then the “OFF” button to disable all the displayed switching settings.
ƒ STO: The “Store Key” saves all current input/output corresponding relations.
- Press the “STO” key.
- Arrang the Output and Input channel combinations.
- The relation between the Output and Input settings will be saved in the memory
temporarily.
ƒ RCL: The “Retriever Key” retrieves the saved input/output corresponding relations.
- Press the “RCL” key.
- Then press the previously saved output channel key
- The system will retrieve the saved input/output status and implement current
staus switching.
ƒ EDID: FIX (fix mode) and TV1 (access the first output channel) selection key.
- FIX mode: The HX-2344 will supply a set of fixed EDID values to support up to
only 1080P high performance TV.
- TV1 mode: The HX-2344 will accecc the EDID values of high performance TV
that connected to the first output channel, and copy the EDID value to all the
input channels so that the DVD player can support to all the HDTV.
ƒ LCD: LCD display shows current HDMI matrix status and operation status.