Avlink HX-1422W - Manual

2*2 HDMI MATRIX
HX-1422W
U SER M ANUAL
V1.0
HX-1422W
Package Contents-
 1x HX-1422W Unit
 1x User Manual
 1x Power Adapter DC 12V with Lock
 1x Remote Controller with Battery
 2x Screws
 4x Foot Pads
Anything missed, please contact with your vendor.
Features
 2 HDMI inputs and 2 HDMI outputs matrix
 Supports resolution up to 4K x 2K@30Hz or 4K x
2K@60Hz (YCbCr4:2:0) or 1080P@60Hz (12-bit)
 Supports 3D pass-through
 HDCP Compliant
 EDID Copy from OUT port 1
 Supports IR remote control
 Supports RS-232 control
-1-
Specifications
Function HX-1422W
HDMI In Connector HDMI A-Type Female x 2
HDMI Out
Connector
HDMI A-Type Female x 2
IR In 3.5ψ Stereo Jack x 1
RS-232 Port 9 Pin Female D Type Connector
Max. Resolution 4K x 2K
Power Adapter
(Min.)
DC 12V with Lock
Housing Metal
Dimensions
(LxWxH)
150 x 80 x 25 mm
Weight 305 g
FRONT VIEW
1. DC JACK
2. IR IN
3. HDMI OUT2
4. HDMI OUT1
REAR VIEW
1. HDMI IN1
2. HDMI IN2
3. RS-232
-2-
TOP VIEW
1. TACK SWITCH
2. LED
3. IR2
Installation
1. Turn off the HDMI source and HDMI display.
2. Connect the HDMI cable between the HDMI source and
the “HDMI IN1 or IN2” port of HX-1422W.
3. Connect the HDMI cable between the HDMI display and
the “HDMI OUT1 or OUT2” port of HX-1422W.
4. Turn on the HDMI source and display.
5. Select source by TACK SW, IR or RS-232
(Optional) IR Receiver Cable
Install
Put it into the HX-1422W “IR IN” port and place the IR
Receiver Cable, so that you can point to it easily with your
IR remote controller.
RS-232 Control
Connect the RS-232 cable between the PC and the
“RS-232” port of HX-1422W.
Key in the command you can change source to output
Command List:
“Switch 1 1“ OUT1IN1
“Switch 1 2“ OUT1IN2
“Switch 2 1“ OUT2IN1
“Switch 2 2“ OUT2IN2
-3-