Avlink YRM-714A - Manual

AUDIO/VIDEO
Selector
YRM-714A
U SER M ANUAL
V1.0
YRM-714A
Package Contents-
ƒ 1 AVLINK YRM-714A
ƒ 1 user manual
ƒ 1 power adapter DC 12V/600mA
ƒ 1 IR remote controller
ƒ 2 rack rails, 8 screws
If anything is missing, please contact your vendor.
Features
ƒ Bandwidth 250MHz (-3db).
ƒ Compliant with the component RCA Video.
ƒ Supports 480p, 576i, 576p, 720p, 1080i.
ƒ Compliant with the RCA Audio.
ƒ Supports digital optical audio.
ƒ Remote controller for operation.
ƒ 1U rack design.
Specifications
Function YRM-714A
Video Input 4 set RCA Connector
Video Output 1 set RCA Connector
Audio Input
4 Digital Optical TOSlink
4 set (R,L) RCA Connector
Audio Output
1 Digital Optical TOSlink
1 set (R,L) RCA Connector
On Line 4
LEDs
Selected 4
Select Switch 4
Power Adapter (Min.) DC 12V 600mA
Housing Metal
Weight 1090g
Dimensions (LxWxH) 269x108x42mm
FRONT VIEW
1. Push-button Switches (Manual type)
2. Port LEDs
3. IR Receiver
-1-
REAR VIEW
1. Power Jack
2. Video Input
3. Stereo Unbalanced Audio Input
4. Digital Optical Audio Input
5. Video Output
6. Stereo Unbalanced Audio Output
7. Digital Optical Audio Output
Installation
Before the installation, make sure the peripherals of all
DVD’s are grounded properly and turned off.
1. Connect the YRM-714A video input RCA connector with
the RCA Video male to male cable from the DVD
players.
2. Connect the YRM-714A audio input RCA connector with
RCA audio cable from DVD players.
3. Connect the YRM-714A video output RCA connector
with the RCA Video male to male cable from HDTV.
4. Connect the YRM-714A audio output RCA connector
with the RCA audio cable from HDTV or the audio
amplifier
5. Connect the power adapter on each side.
6. The red LEDs will flash back and forth. If not, please go
back to check step 5.
7. Turn on the DVD players and HDTV and the audio
amplifier.
8. The green on line LED flashes while the DVD player
has been connected in proper order with the
corresponding port & is running.
-2-