Avlink VAX-2088 - Manual (Page 22)

VAX Matrix Switching System—User Manual
21
Example 2: Operation for synchronously switching video signals from NO.4 channel to
NO.1, 3, 5 and 6 output channels.
Key LCD Display Operation
1. Press the AUDIO key to
turn off the LED indicator,
then enter the output channel.
2. Press the NO.1 key of the output
channel for 2 seconds, then enter the
input channel when the red 0 on
LCD flickers.
3. Press the NO.4 key of the input
channel for 2 seconds to select
operation of input from NO.4
channel and output from NO.1
channel. Enter the output channel
when VIDEO shows 4 at NO.1
channel on LCD.
4.Press the NO.3 key of the output
channel for 2 seconds and enter the
input channel when the red 0 on
LCD flickers.
5.Press the NO.4 key of the input
channel for 2 seconds to select
operation of input from NO.4
channel and output from NO.1 and
NO.3 channels. Enter the output
channel when VIDEO shows “4” at
NO.1 and NO.3 channels on LCD.
6.Press the NO.5 key of the output
channel for 2 seconds and enter the
input channel when the red 0 on
LCD flickers.
7.Press the NO.4 key of the input
channel for 2 seconds to select
operation of input from NO.4
channel and output from NO.1, 3 and
5 channels. Enter the output channel
when VIDEO shows “4” at NO.1, 3
and 5 channels on LCD.