Avlink SX-2088 - Manual (Page 25)

SX Matrix Switching System—User Manual
24
Step 2: Make sure you have selected “AUDIO” and not “Video”. Directly click on the matrix
icons corresponding to INPUT number key 02 and OUTPUT number key 08 to turn them
into ，you have then selected audio switching of input 02 and output 08.
Upon completion of the above 2 steps, you have successfully switched audio/video channel 1
to output channels 1, 6 and 7 and also switched audio channel 2 to output channel 8.
Second Way:
Step 1: Make sure you have selected “Video” and not “AUDIO”.
Step 2: Select the output number keys 01,06 and 07 to the right and input number key 01to the
bottom. Afterwards, press consecutively the previously pressed output number keys 01,06 and 07
to the right (or you can press the Deselect all output key). This way, you have selected video
switching of input 01 to output 01,06 and 07.
Step 3: Make sure you have selected “AUDIO”and not “Video”.
Step 4: Select output number key 08 to the right and input number key 02 to the bottom.
Afterwards, press again the previously-pressed output number key to the right（or you can
press the Deselect all output key）. This way, you have selected audio switching of input 02 and
output 08.
Upon completion of the above 4 steps, you have completed the operation of switching video
channel 1 to output channel 1, 6, and 7 while also switching audio channel 2 to output channel 8.