Avlink PG-3D1X - Manual (Page 3)

Chapter 1 Introduction
PG-3D1X is an advanced SDI pattern generator for
checking the transmission of the coaxial cable laid in a
3G-SDI system and designing to be a useful tool for the new
generation of digital video/monitor products. It supports
multi-format (3G/HD/SD) and multi-pattern up to 8 patterns
for you to test and calibrate a digital video/monitor. Further,
it also can help you to improve the quality of digital
video/monitor with side-by-side comparisons. Through the
friendly interface and smart design, not only you can easy
and quick to use the device but also you can reduce your
test expenditure.
Caution
To avoid and minimize the risk of damage to the device,
please pay attention to the safety instructions even though
the device had been tested for conformance to safety
requirements and certified for international using.
ƒ Follow all instructions marked on the device during using.
ƒ Do not attempt to maintain the device by yourself, any
faults, please contact your vendor.
ƒ Provide proper ventilation and air circulation and do not
use near water.
ƒ It is better to keep it in a dry environment.
ƒ Only using the power adapter and connection cables that
are supported with the device.
ƒ Please use the Pile Alkaline and the working time for the
battery is about 1~1.5hours.
ƒ It is better to charge the battery when the battery power
indicator becomes low.
ƒ Do not use liquid or aerosol cleaners to clean the device.
ƒ Always unplug the power to the device before cleaning.
Package Contents
ƒ 1 3G-SDI Pattern Generator PG-3D1X
ƒ 1 power adapter DC 9V
ƒ 1 user manual
ƒ 1 SDI 1.2M cable (BNC Male to Male)
ƒ 1 9V Pile Alkaline
All packages have been checked carefully for their
completeness and functionality before shipped. Please
contact with your vendor if any items listed as above are
missed or damaged.
3