Avlink PG-HD1X - Manual (Page 8)

Chapter 2 Connection
Caution
Please power off the digital monitor and the device before
you begin the connection.
Connect PG to Monitor
One or Two Digital
monitor/TV
ƒ Connect the attached adapter cable from your device to
the power source (outlet).
ƒ Switch off the monitor.
ƒ Connect the BNC extension cord from your device to the
Digital monitor/TV.
ƒ Switch on the power of the Digital monitor/TV.
ƒ Push the Power SW of your device to power on/off your
device.
Caution
Please use the Pile Alkaline to the device.
8
SDI Cable