Avlink YVS-714A - Manual

AUDIO/VIDEO
Distribution
Amplifier
(YVS-714A)
U SER M ANUAL
V1.0
YVS-714A
Package Contents-
ƒ 1 AVLINK YVS-714A Audio/Video Distribution
Amplifier
ƒ 1 user manual
ƒ 1 power adapter DC 12V 600mA
ƒ 1 1.2m component (Video) Cable
ƒ 1 1.2m Audio R/L Cable
ƒ 2 rack rails, 8 screws
If anything is missing, please contact with your vendor.
Introduction
Through the YVS-714A Audio/Video Distribution Amplifier,
you can use one DVD player to display an identical image
on 4 projectors or HDTV’s.
YVS-714A Audio/Video Distribution Amplifier is ideal for:
ƒ
Test bench facilities
ƒ Data Center
ƒ Help desks
ƒ Video broadcasting:
Presentation
Stock quotes
Timetables
Educational facilities
Features
ƒ Bandwidth 400MHz (-3db).
ƒ Compliant with the component RCA Video.
ƒ Supports 480p, 576i, 576p, 720p, 1080i.
ƒ Video input impedance: 75Ω
ƒ Compliant with the RCA Audio.
ƒ Audio input impedance: 10KΩ
ƒ Supports digital optical audio
ƒ Audio Frequency Response 20Hz~20KHz.
ƒ Extends the signal up to 15 meter.
ƒ Can be cascaded.
ƒ 1U rack design.
Specifications
Function YVS-714A
Video Input 1 Set RCA Connector
Video Output 4 Set RCA Connector
Audio Input
1 Set(R,L) RCA Connector
1 Digital Optical TOSlink
Audio Output
4 Set(R,L) RCA Connector
4 Digital Optical TOSlink
Cable Distance
(Device to Monitor)
15m (Max.)
Power Adapter (Min.) DC 12V 600mA
Housing Metal
Weight 1095g
Dimensions (LxWxH) 269x106x46mm
-1-
FRONT VIEW
1. Power LED
REAR VIEW
1. Input Power Jack
2. Video Input
3. Stereo Unbalanced Audio Input
4. Digital Optical Audio Input
5. Video Output
6. Stereo Unbalanced Audio Output
7. Digital Optical Audio Output
Installation
1. Turn off the DVD player and monitors
2. Connect the Video male extension cable between the
DVD player and the YVS-714A“Video In” port of the
Distribution Amplifier.
3. Connect YVS-714A audio input connector with the audio
cable from DVD player.
4. Connect the Video male extension cables between the
HDTV’s and the YVS-714A“Video Out” ports of
Distribution Amplifier.
5. Connect YVS-714A audio output connector with the
audio cable from the audio amplifier
6. Connect the power adapter on each side.
7. Turn on the DVD player and HDTV’s and the audio
amplifier.
-2-