Avlink CVS-714A - Manual

AUDIO/VIDEO
Distribution
Amplifier
(CVS-714A)
U SER M ANUAL V1.0
CVS-714A
Package Contents-
ƒ 1 AVLINK CVS-714A Audio/Video Distribution
Amplifier
ƒ 1 user manual
ƒ 1 power adapter DC 12V 600mA
ƒ 1 1.2m composite (Video), Audio R/L Cable
ƒ 2 rack rails, 8 screws
If anything is missing, please contact with your vendor.
Introduction
Through the CVS-714A Audio/Video Distribution Amplifier,
you can use one DVD player to display an identical image
on 4 projectors or TV
’ s.
CVS-714A Audio/Video Distribution Amplifier is ideal for:
ƒ
Test bench facilities
ƒ Data Center
ƒ Help desks
ƒ Video broadcasting:
Presentation
Stock quotes
Timetables
Educational facilities
Features
ƒ Bandwidth 400MHz (-3dB).
ƒ Compliant with the composite RCA Video.
ƒ Video input impedance: 75Ω
ƒ Compliant with the RCA Audio.
ƒ Audio input impedance: 10KΩ
ƒ Audio Frequency Response 20Hz~20KHz.
ƒ Extends the signal up to 20 meter.
ƒ Can be cascaded.
ƒ 1U rack design.
Specifications
Function CVS-714A
Video Composite Video
Video Input 1 RCA Connector
Video Output 4 RCA Connector
Audio Stereo Unbalanced
Audio Input 1 Set(R,L) RCA Connector
Audio Output 4 Set(R,L) RCA Connector
Cable Distance
(Device to Monitor)
20 m (Max.)
Power Adapter (Min.) DC 12V 600mA
Housing Metal
Weight 930g
Dimensions (LxWxH) 269x106x46mm
-1-
FRONT VIEW
1. Power LED
REAR VIEW
1. Input Power Jack
2. Video Input
3. Audio Input
4. Video Output
5. Audio Output
Installation
1. Turn off the PC/DVD player and the TV’s
2. Connect the Video male extension cable between the
PC/DVD player and the CVS-714A“Video In” port of the
Distribution Amplifier.
3. Connect CVS-714A audio input connector with audio
cable from PC/DVDs.
4. Connect the Video male extension cables between the
TV’s and the CVS-714A“Video Out” ports of the
Distribution Amplifier.
5. Connect CVS-714A audio output connector with audio
cable from audio Amplifier
6. Connect the power adapter on each side.
7. Turn on the PC/DVD player and the TV’s and the audio
Amplifier.
-2-