AvMap Geosat 2 - Manual (Page 11)

31
In MENU “Track” you can enter all the settings regarding the way of recording/
displaying of the track.
In MENU “Alarms” you can enter a speed limit and a speed alarm when you exceed
it. You can also enter a Mark alarm informing you when you reach a Mark. Moreover
you can set a GPS fix lost alarm.
In MENU “Date &Time” you can enter all the settings of time and date and also
activate "Elapsed Timer" and/or "Countdown".
In MENU “Units” you can set the units of measurements.
In MENU “Language” you can set the Language text and/or voice.
In MENU “Simulator” you can enter all the settings of the simulation mode. If your
route is already planned and you set Simulation mode to Route you will see your
simulated position as if you were really driving on that route at the selected speed.
NOTES on the set-up:
If you modify the configuration settings and then you cannot go back to the
previous set-up anymore, restore the unit to the factory defaults (MENU
“General”).
User Manual