AvMap EKP V Installation Guide - Manual (Page 5)

Aeronautical Products EKP V Docking Station
4 - Installation Guide
Aeronautical Products EKP V Docking Station
Installation Guide - 5
Dimensions and Specifications
Versions:
• Standard (UX0DS100AM) : including the wire clamp board adapter.
• OEM (UX0DS200AM): including a DB15 adapter for direct wire soldering
Interfaces:
• 4 x USB 2.0 ports
(1 x battery powered by EKP V internal),
• 2x Serials ports
(1 x RS-232, 1 x TTL levels),
• Audio IN,
• Audio OUT,
• Video IN
(video composite signal PAL or NTSC),
• Push-To-Talk
• Power input voltage:
10-35 VDC (28 W max.),
• Temperature range -20, + 70 °C.
A
B
C
Front Side
A Male Pogo Pin connector, to be coupled with the female connector on the back side of the EKPV.
B Fuse: Socket for the 3A fuse.
C Safety switch to disable the power supply to the connector (A) when the device is not docked.