AvMap GeoPilot Plus - Manual (Page 78)

78
Fig. 15.4.4 - About page
If it is necessary to return your GEOPILOT for repair, you must obtain a return authorization (RA)
number from C-MAP Aviation prior to shipping the system. Include with the GEOPILOT a description
of the problem, your RA number, and your name and address. If your return shipping address is
different, please include it. All packages are to be returned postage paid. As we are not responsible
for packages in transit, we recommend you purchase insurance and tracking information.
15.5 SYStEM tESt
If you have connected your GEOPILOT according to the instructions and chosen the proper menu
selections and are still having problems a RAM Clear will bring the system back to factory default
settings. Many times this will clear the errors and bring the GEOPILOT back to operating condition.
RAM CLEAR can be found in the System Test Menu.
Note
The additional tests in the System Test Menu are intended for factory testing. Faulty findings within these menus
is not necessarily a true result, as factory settings and equipment are often used during these tests.
15.5.1 rAM Menu
Make sure the GEOPILOT is turned Off. While pressing and holding any other key, turn the
GEOPILOT On. A new menu will appear on the display. Use the cursor key to select the RAM
Menu and press ‘ENT’ to select RAM Test or RAM Clear.
• RAM Test
‘ENT’ on RAM Test to verify the integrity of the RAM. If the message “ERROR” appears the RAM is
physically damaged.
• RAM Clear
‘ENT’ on RAM Clear to to activate, press ‘ENT’ again to confirm (at this time if you do not wish to
clear RAM press ‘ESC’).
This operation will erase all Marks, Flight Plans, stored Track plots and destinations. It will also
return all selections (Input Data Format, selective display etc.) to original default values.
15.5.2 C-CArD Menu
To check the Compact Flash and its connector.
• Compact Flash Test