AvMap ULTRA UX0EFS3XAM - Manual (Page 14)

14 - User and Installation Manual
AvMap Ultra EFIS
User and Installation Manual - 15
AvMap Ultra EFIS
4. System Operation
4.1 How to operate the unit
The Ultra contains three display modes:
1. PFD mode
2. HSI mode
3. SETUP mode
The rotor plus centre click allow to switch from one mode to the other and to select
different menu option.
At start up the disclaimer page is shown. In the disclaimer page rotate the knob (or push
once the rotation knob) to read the disclaimer and confirm by pushing once the rotation
knob to enter the PFD mode.
Figure 8
CALIBRATE
HSI
QNH
Setup Menu PFD Menu
SETUP
DATABASE
While in PFD mode, pushing once the rotation knob an option menu window appears on
the display. Rotate the knob to select a menu and confirm by pushing the rotation knob.
The option menu window disappears if the rotation knob has not been operative for
more than 5 seconds.
While in PFD mode, you can enter the HSI mode by pushing the rotation knob, select
HSI rotating the knob and confirm by pushing again the rotation knob. To go back to the
PFD display mode push the rotation knob, select PFD and confirm by pushing again
the rotation knob.
To enter the SETUP mode from either the PFD or HSI mode keep the rotation knob
pressed for 5 seconds.