Awntech DallasRetro CR33-NV User Manual
The dallas retro, Style awning, Assembly and installation instructions
The Dallas Retro
®
Style Awning
Important Installation Information:
The Dallas Retro Frame must be installed on the wall as there is
no connecting part between BP and TB
ASSEMBLY AND INSTALLATION INSTRUCTIONS
CAUTION: When you are opening the box keep children away. This
awning frame contains sharp metal and small hardware parts.
Choking hazard: Keep parts away from children. They may choke on
hardware. Be extremely cautious around children.
Models with Valance:
RR22, ER23, CR32, CR34, CR43, CR44, ER2442, ER12, ER1836, ER1230, ER1030, ER24,
CR33
Models without Valance:
RR22-NV, ER23-NV, CR32-NV, CR34-NV, CR43-NV, CR44-NV, ER2442-NV, ER12-NV, ER1836-
NV, ER1230-NV, ER1030-NV, ER24-NV, CR33-NV
All the awning sizes over 9’ wide come in two sections. Example: Top Bar (TB) consists of
TB1 & TB2 and Front Bar (FB) consists of FB1 & FB2
See the chart below for the width of the awning:
Awning Size
Width in inches
Awning Size
Width in inches
3 40.5 12
148.5
4 52.5 13
160.5
5 64.5 14
172.5
6 76.5 15
184.5
7 88.5 16
196.5
8 100.5 17
208.5
9 112.5 18
220.5
10 124.5 19 232.5
11 136.5 20 244.5
OUR AWNINGS ARE DESIGNED 4.5” WIDER THAN STANDARD
WINDOW/DOOR OPENINGS SO THAT YOU WILL BE ANCHORING INTO
THE STUDS AROUND THE WINDOW OR DOOR. EXAMPLE: RR22-5 is for a
5’-0” wide window. It measures 64.5” wide, 31” tall (24” plus 7” valance) and 24”
deep (projection).
DallasRetro ER24-NV, DallasRetro ER1030-NV, DallasRetro ER1230-NV, DallasRetro ER1836-NV, DallasRetro ER12-NV, DallasRetro ER2442-NV, DallasRetro CR44-NV, DallasRetro CR43-NV, DallasRetro CR34-NV, DallasRetro CR32-NV, DallasRetro ER23-NV, DallasRetro RR22-NV, DallasRetro CR33, DallasRetro ER24, DallasRetro ER1030, DallasRetro ER1230, DallasRetro ER1836, DallasRetro ER12, DallasRetro ER2442, DallasRetro CR44, DallasRetro CR43, DallasRetro CR34, DallasRetro CR32, DallasRetro ER23, DallasRetro RR22
Document Outline
- A. WHO GIVES THIS WARRANTY? Awntech Corporation
- B. WHO IS ENTITLED TO THIS WARRANTY?
- This Warranty applies only to the original purchaser who paid for the product and may not be assigned or transferred to subsequent owners. This Warranty applies only to products purchased and installed in the US.
- C. WHAT ARE THE RESPONSIBILITIES OF AWNTECH CORPORATION UNDER THIS WARRANTY?
- Subject to the terms and conditions set forth herein, Awntech Corporation will furnish replacements for parts found by Awntech Corporation to be defective in design, manufacture or assembly, under each specific component or product warranty as set forth below.
- D. WHAT ARE THE RESPONSIBILITIES OF THE ORIGINAL PURCHASER UNDER THE WARRANTY?
- 1. Before any claims may be made under this Warranty, the original purchaser must have paid in full for the product covered under the Warranty, according to the terms and conditions of the pay-plan defined in the original order. IF THE PURCHASER HAS FAILED TO MAKE FULL PAYMENT, THIS WARRANTY SHALL BE NULLIFIED AND AWNTECH CORPORATION SHALL BE RELIEVED FROM ANY RESPONSIBILITY OR LIABILITY UNDER THIS WARRANTY. The purchaser agrees and acknowledges that this Warranty agreement constitutes an executor contract.
- 2. The purchaser must use care in installation, maintenance, operation, use, and storage of the product in accordance with the instructions contained in the owner’s manual. ANY FAILURE TO INSTALL, MAINTAIN, OPERATE, USE AND STORE THE PRODUCT IN ACCORDANCE WITH THE INSTRUCTIONS CONTAINED IN THE OWNER’S MANUAL WILL NULLIFY THIS WARRANTY AND RELIEVE AWNTECH CORPORATION FROM ANY RESPONSIBILITY OR LIABILITY UNDER THIS WARRANTY.
- 3. Promptly notify Awntech Corporation of any claims (within 10 days of purchase).
- 4. The purchaser may be required to provide a photograph of any defective parts. The purchaser may also be required to pay a deposit until the defective parts are returned to Awntech Corporation for inspection. The purchaser must obtain a return authorization form from Awntech Corporation’s customer service department prior to the return of any merchandise and after having received such authorization, return the part or product, freight prepaid, to Awntech Corporation.
- E. WHAT IS COVERED UNDER THIS WARRANTY?
- 1. All the frame parts and components and the fabric is covered under warranty for manufacturing defects only:
- (a) Should the purchaser promptly notify Awntech Corporation of such defects within one year (12 months) from the date of the original purchase, the defective component will be replaced at no charge. Awntech reserves the right to ask for the defective part to be returned and/or photos of the defective part.
- (b) After one year but within five years (60 months) from the date of the original purchase, a defective component will be replaced upon the purchaser's payment of 1/60th of the full retail cost of the component for each month of use prior to the claim.
- F. GENERAL PROVISIONS AND LIMITATIONS
- 1. THE WARRANTY GRANTED HEREIN IS THE EXCLUSIVE REMEDY FOR THE PURCHASER. AWNTECH CORPORATION MAKES NO OTHER WARRANTIES TO THE PURCHASER, EXPRESS, STATUTORY, IMPLIED OR OTHERWISE AND ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATIONS, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED.
- 2. TO THE EXTENT PERMITTED BY LAW, AWNTECH CORPORATION SHALL HAVE NO LIABILITY TO THE PURCHASER OR ANY OTHER PERSON FOR INCIDENTAL, SPECIAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES OF ANY KIND OR NATURE WHATSOEVER, WHETHER ARISING OUT OF BREACH OF WARRANTY OR OTHER BREACH OF CONTRACT, NEGLIGENCE OR OTHER TORT, OR OTHERWISE, EVEN IF AWNTECH CORPORATION SHALL HAVE BEEN ADVISED OF THE POSSIBILITY OR LIKELIHOOD OF SUCH POTENTIAL LOSS OR DAMAGE. IN NO EVENT SHALL AWNTECH CORPORATION BE LIABLE FOR LOSS OF PROFITS AND/OR WAGES.
- 3. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, OR DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.