bamix DeLuxe - Manual (Page 36)

36
The bamix will stay longer “fit” if you oil it every few months. For
this use an acid-free oil (e.g. vaseline oil, obtainable at a chemist’s).
Hold the bamix upside down with the cutter guard facing you, put
2 or 3 drops of oil on the drive shaft, and switch on the appliance
for 2 to 3 minutes. Afterwards rinse the appliance in hot water.
Cleaning and care
Cleaning is very easy. Remove the attachment and clean it. It is
enough to clean the chromium-plated part of the appliance after
every use under running water (do not switch on). The easiest way
to clean off bits of food which have stuck to bamix is to hold it in
a jug with hot water and switch it on. Take care that the switch
does not come in contact with water.
Important: Clean the appliance as soon as you have finished
working, to prevent the drive shaft getting clogged.
Receptacles
You can work in any receptacle, even directly in a pan on the
stove. Use small receptacles for small amounts and large
receptacles for larger amounts. Narrow, high receptacles are
more suitable for working in than wide, shallow ones.
Push the attachment as straight as possible on to the stub in such
a way that the drive pin on the stub fits exactly into the small recess
in the socket of the attachment. The attachment is designed to
make this process easy. The attachment is removed by simply
pulling it off from the stub. For protection please use a cloth.
Careful: For safety’s sake, when you exchange the attachments
always pull out the plug.
Putting on and exchanging the attachments