BASO H91 Series - Manual (Page 4)

4 H91 Series BASOTROL Shutoff Gas Valve Installation Instructions
Technical Specifications
Product H91 Series BASOTROL Shutoff Gas Valve
Rated Inlet Pressure 0.5 psi (35 mbar [3.5 kPa])
Valve Body Aluminum
Permissible Ambient
(Surface) Temperature CSA: -40 to 175ºF (-40 to 79ºC)
UL: -40 to 140ºF (-40 to 60ºC) (except H91E_ and H91L_ -40 to 125ºF [-40 to 52ºC])
Available Magnetic
Operator Cover Styles Aluminum side conduit hub
Aluminum top conduit hub
Aluminum top outlet without conduit hub
Aluminum side outlet with eyelet
Steel with top conduit hub (UL Listed)
Plastic with 1/4 in. (6.35 mm) male quick-connect terminals
Electrical Rating 25 VAC, 60 Hz, 0.3 A, 5 W
208/240 VAC, 60 Hz, 0.03 A, 5 W
120 VAC, 60 Hz, 0.05 A, 5 W
25 VAC, 60 Hz, 0.4 A, 7.5 W
240 VAC, 60 Hz, 0.04 A, 7 W
120 VAC, 60 Hz, 0.08 A, 7 W
240 VAC, 60 Hz, 0.03 A, 5 W
208/240 VAC, 60 Hz, 0.037 A, 6 W
12 VDC, 0.5 A
Wiring Connections 1/4 in. (6.35 mm) male quick-connect terminals or 30 in. (762 mm) lead wires
(other lengths are optional)
Inlet and Outlet Pipe Size 1/8, 1/4, 3/8, 1/2, 3/4, and 1 in. NPT; 1/4, 3/8, and 1/2 in. cc; 3/8 Rp
Types of Gas Natural, Liquefied Petroleum (LP), or LP gas-air mixtures
Packaging Bulk pack supplied to original equipment manufacturer (individual pack optional)
Bulk Pack Quantity 40 or 80 (depending on the valve size)
Bulk Pack Weight 40 to 52 lb (18 to 24 kg)
Agency Listing CSA Certificate Number 229521-1656058 except H91TB
Australian Gas Association Certificate Number 4235, AGA Class 3 (H91A_, B_, C_, D_, E_,
L_, and M_ only)
UL Recognized File Number MH5939 (H91A_, B_, C_, D_, E_, J_, L_, R_, and W_ only)
(except H91WS and H91RB)
UL Listed File Number MH5939 (H91AA_, AB_, AC_, AD_, AM_, and AR_ only)
Specification Standards ANSI Z21.21, CSA 6.5
AS 4629
UL Standard 429
Performance specifications are nominal and conform to acceptable industry standards. All agency certification of BASO products is performed
under dry and controlled indoor environmental conditions. Use of BASO products beyond these conditions is not recommended and may void
the warranty. Product must be protected if exposed to water (dripping, spraying, rain, etc.) or other harsh environments. The original
equipment manufacturer or end user is responsible for the correct application of BASO products. Consult BASO Gas Products LLC for
questionable applications. BASO Gas Products LLC shall not be liable for damages or product malfunctions resulting from misapplication or
misuse of its products.
Refer to the H91 Series BASOTROL® Automatic Gas Valve Product Bulletin (BASO-PB-H91) for necessary information on operating and
performance specifications for this product.
1007 South 12th Street
PO Box 170
Watertown, WI 53094
www.baso.gas
1-877-227-6427 (1-877-BASOGAS) Published in U.S.A.