BASO L62GB - Manual (Page 5)

L62GB BASO Safety Shutoff Device Installation Instructions 5
Technical Specifications
Product L62GB BASO Safety Shutoff Device
100% Shutoff Yes
Conduit Opening 2 (1 plugged)
Switch Contacts
Electrical Specifications
24/25 VAC 125 VAC 250 VAC
* 8 A 4 A
Ambient Temperature
Range
-40 to 175

F (-40 to 79

C)
Reset Manual
Switch Action SPST
Type of Gas Natural, Liquefied Petroleum (LP), manufactured, mixed, or LP gas-air mixtures
Rated Inlet Pressure 0.5 psi (35 mbar)
Packaging Bulk pack supplied to original equipment manufacturer (individual pack optional). L62GB-3
supplied as individual pack only.
Bulk Pack Quantity 30
Weight 32 lb (14.5 kg)
Agency Listings CSA Certificate Number 229521-1656085
Specification Standards ANSI Standard Z21.20
CAN1-6.4
* Switch can be used on 24/25 VAC installation.
Performance specifications are nominal and conform to acceptable industry standards. All agency certification of BASO products is performed
under dry and controlled indoor environmental conditions. Use of BASO products beyond these conditions is not recommended and may void
the warranty. Product must be protected if exposed to water (dripping, spraying, rain, etc.) or other harsh environments. The original
equipment manufacturer or end user is responsible for the correct application of BASO products. Consult BASO Gas Products LLC for
questionable applications. BASO Gas Products LLC shall not be liable for damages or product malfunctions resulting from misapplication or
misuse of its products.
Refer to the L61, L62 Series BASO Safety Shutoff Device Product Bulletin (BASO-PB-L61/L62) for necessary information on operating and
performance specifications of this product.
1007 South 12th Street
PO Box 170
Watertown, WI 53094
www.baso.com
1-877-227-6427 (1-877-BASOGAS) Published in U.S.A.