Behlen 76010048 User Manual
Page 4
F-19666-1
Rev. 11-29-01
11-21-00
1. Install poly boards into the stall front and door (door not shown in illustration). See chart below for
reference guide.
2. Place Swing Out Door F/PHSW into the opening. At the same time, install board C. Mark the
locations of the four outside holes and then drill through the poly using a 7/16” dia. drill bit.
3. Place the Poly Reinforcement Backing Frame into place and bolt the backing frame to the
Swing-out Door Frame using the 3/8” x 2” bolts supplied in the hardware bag. (See illustration
below for reference).
12’ POLY BOARD CHART
Ref.
Wood Size
Stall - Qty.
Door - Qty.
A
2” x 6” x 35½”
4
- - -
B
2” x 6” x 47½”
7
8
C
2” x 6” x 22”
1
- - -
D
2” x 6” x 24¾”
4
- - -
E
2” x 2” x 35½”
2
- - -
F
2” x 2” x 47½”
1
1
G
1” x 2” x 35½”
1
- - -
H
1” x 2” x 47½”
- - -
1
12’ Front Horse Stall
with poly boards
installed
Reinforcement
Backing Frame
Swing Out Door F/PHSW