Casio QV-700 - Manual (Page 21)

81
Using the Camera with a Connected Device
The camera terminals
The following describes which the camera terminal you should use
for each type of connection.
VIDEO OUT – Use this terminal when connecting to the VIDEO IN
terminal of a TV, video tape deck, video printer, or
other similar devices. Use the special video cable
that comes with the camera for such connections.
Connecting to Other Devices
* The type of connecting cable you should use depends on the type
and shape of the terminals equipped on the digital camera you are
connecting to. See pages 81 through 88 for details.
DIGITAL – Use this terminal to connect to a personal computer (re-
quires optional Connection Kit), another CASIO Digital
Camera, or a QV Color Printer. The illustration below
shows how to connect to another digital camera.
VIDEO L R
INPUT
AUDIO
VIDEO OUT
terminal
VIDEO IN
terminal of other
device
Special video
cable that
comes with
camera
DIGITAL terminal*
DIGITAL terminal
Connecting
cable*
Using the Camera with a Connected Device
82
Using the Camera with a Connected Device
The following section provides specific information on how you can
use the camera after connecting to various types of devices. In each
case, the camera terminal you should connect to is indicated in the
title as
VIDEO and DIGITAL .
Important!
• Make sure that the power of all devices is turned off before connect-
ing them.
• You should also check the owner’s manuals of the device you are
connecting to the camera for precautions and other information.
Television VIDEO
Use the special video cable that comes with the camera to connect it
to a television, and you can then view the images stored in camera
memory on the TV’s screen.
Important!
• The camera can be connected only to a TV that is equipped with a
VIDEO IN terminal.
• Make sure that the power of both the camera and the TV are turned
off when making connections.
• The signal output through this camera's VIDEO OUT terminal is an
NTSC signal. An image output through this terminal will not look
normal if the camera is connected to a PAL or other type of TV or
video deck.
• Leaving the same image displayed on a TV or computer CRT
screen for very long periods can cause that image to “burn in”, leav-
ing a ghost of the image even after the original image is cleared. Be
sure not to leave an image on a TV or CRT screen for long periods.
83
Using the Camera with a Connected Device
After connecting the camera and TV, use the same procedures as
those described under “Displaying Images on the Camera’s LCD” on
page 51.
Video Tape Deck VIDEO
You can use the video tape deck to record images from the camera.
To record camera images on video tape
1. Use the special video cable that comes with the camera to connect
to the VIDEO IN terminal of the video tape deck.
2. Set up the video tape deck to record images input through its
VIDEO IN terminal.
• Consult the owner’s guide that comes with the tape deck for details
about how to set up for recording.
3. Enter the camera Playback Mode and start the video deck record
operation.
• It is probably best to use auto play when recording camera images
to video tape, because it changes pages automatically at a preset
speed.
TV
Accessory video cable
VIDEO IN terminal
VIDEO OUT
terminal
After connecting the camera and TV, set the channel
of the TV to the channel used for video input.
Using the Camera with a Connected Device
84
• Indicators or symbols (page 39) are also recorded on the video tape
if they are turned on. Be sure to turn off display of remaining pages
if you do not want them in the taped images.
• If the low battery indicator (page 25) is displayed while you are re-
cording to video tape, it will also be recorded with the image. If this
happens, either replace batteries or use the AC adaptor.
Video Printer VIDEO
You can use Video Printer to print copies of images in camera
memory.
To print camera images on a Video Printer
1. Use the special video cable that comes with the camera to connect
to the VIDEO IN terminal of the video printer.
2. Set up the video printer to print images input through its VIDEO IN
terminal.
• Consult the owner’s guide that comes with the video printer for de-
tails about how to set up for printing.
3. Enter the camera Playback Mode and display the image you want
to print.
4. Start the video printer’s print operation.
• Indicators or symbols (page 39) are also included on the print if they
are turned on. Be sure to turn off display of remaining pages if you
do not want them in the print.
• If the low battery indicator (page 25) is displayed while you are print-
ing, it will also be printed with the image. If this happens, either re-
place batteries or use the AC adaptor.