BlackVue DR500-HD V2.00 - Manual (Page 16)

DR500-HD 15
4
Use the cable clip to organize the power cord so that it doesn't interfere
with the driver's vision.
5
Adjust the lens angle of the camera.
Note
y After adjusting the angle of the camera lens, remember the angle of
the mounting bracket so that it can be installed at the same angle
next time.
6
Start the engine and check if the product works properly.
Caution
y Do not remove the microSD card while it is saving or reading data.
The data may be damaged or malfunction caused.
y Set the time (time zone) when you use BlackVue for the first time.
(28 page)
Note
y After a test drive, check if video was correctly recorded.
y Recorded video is saved in the MP4 format.