Canon SCANFRONT M11062 - Manual (Page 11)

7
ScanFront Setup Overview
Follow the procedures below to set up the ScanFront 220/220P.
1. Checking the Supplied Accessories (See p. 8)
Confirm that all of the supplied accessories are included.
2. Removing the Packing Materials and Attaching
the Feed Roller (See p. 9)
Remove the packing materials protecting the scanner, and
attach the supplied feed roller. (See p. 9.)
3. Installing the Scanner and Connecting to a
Network (See p. 12)
Move the scanner to the desired installation site, and
connect the AC adaptor and network cable.
4. Turning the Power ON and OFF (See p. 14)
Use the power switch to turn the scanner ON, and press
[Power off] on the touch panel to turn it OFF.
5. Configuring the Scanner Settings (See p. 15)
To set up the scanner, configure the administrator settings
on the scanner and the Web Menu settings from your
computer’s Web browser. This guide describes how to
configure the network settings from the scanner, how to set
the date and time and confirm the time zone from the Web
Menu, and how to configure mail server settings for
sending e-mail.
For details on other settings, refer to the Operation Guide
and ScanFront 220/220P INSTRUCTIONS (electronic
manual).
* For a Web browser, use Microsoft Internet Explorer 6.0 or
later.
• Network Settings
From the [Administrator setting] screen on the scanner,
configure the [Device Name] and [IP Address] settings
needed to connect to the network. (See p. 16.)
• Configuring the Date and Time and Confirming the
Time Zone
Set the date and time and confirm the time zone by
logging in to the Web Menu. (See p. 18.)
6. Scanning Procedure (See p. 21)
This section gives an overview of the procedure for
scanning a document, using the example of scanning from
the Home screen. For more details on this procedure, refer
to the Operation Guide and ScanFront 220/220P
INSTRUCTIONS (electronic manual).