BMW 2013 X5 User Manual

Page 233

Advertising
background image

Configuring the mobile phone

Additional functions can be activated or deacti‐
vated for paired and connected mobile phones.

1.

"Telephone"

2.

"Bluetooth® (phone)"

3.

Highlight the mobile phone to be config‐
ured.

4.

Open "Options".

5.

"Configure phone"

6.

At least one function must be selected.

"Telephone"

"Additional telephone"

"Audio"

7.

"OK"

If a function has already been assigned to an‐
other connected mobile phone, the function is
deactivated in that mobile phone and the mobile
phone is unpaired when the function is assigned
to a new mobile phone.

Swapping the telephone and additional

telephone

The function of the telephone and additional tel‐
ephone can be swapped automatically.

1.

"Telephone"

2.

"Bluetooth® (phone)"

3.

"Swap phone/addit. phone"

Unpairing the mobile phone

1.

"Telephone"

2.

"Bluetooth® (phone)"

3.

Highlight the mobile phone that is to be un‐
paired.

4.

Open "Options".

5.

"Remove phone from list"

What to do if...

Information on suitable mobile phones, refer to
page

230

.

The mobile phone could not be paired or con‐
nected.

Is Bluetooth activated in the vehicle and on
the mobile phone? Activate Bluetooth in the
vehicle and on the mobile phone.

Do the Bluetooth passkeys on the mobile
phone and the vehicle match? Enter the
same passkey on the mobile phone and via
iDrive.

Did it take longer than 30 seconds to enter
the passkey? Repeat the pairing procedure.

Are too many Bluetooth devices connected
to the mobile phone or vehicle? Delete con‐
nections with other devices if necessary.

Is the audio connection activated? Deacti‐
vate the audio connection.

Is the mobile phone in power-save mode or
does it have only a limited remaining battery
life? Charge the mobile phone in the snap-
in adapter or via the charging cable.

Depending on the mobile phone, it is possi‐
ble that only one mobile phone can be con‐
nected to the vehicle. Unpair the connected
mobile phone from the vehicle and pair and
connect only one mobile phone.

The mobile phone no longer reacts.

Switch the mobile phone off and on again.

Seite 233

Telephone

Communication

233

Online Edition for Part no. 01 40 2 901 869 - 03 12 500

Advertising