Brake force display, Active protection – BMW 2013 3 Series User Manual

Page 109

Advertising
background image

If the limit is reduced to below the vehicle
speed while driving, a signal sounds after
approx. 30 seconds.

If the limit is intentionally exceeded by
pressing the accelerator all the way down,
there is no signal.

Displays in the instrument cluster

Speed limit marking

Display in the speedometer:

The marking lights up green:
the system is active.

The marking does not light
up: the system is switched
off.

Indicator lamp

The indicator lamp lights up: the sys‐
tem is switched on.

The indicator lamp flashes: the set
speed limit has been exceeded.

Brief status display

Brief display of the set speed limit.

Brake force display

The concept

During normal brake application, the outer
brake lamps light up.

During heavy brake application, the inner
brake lamps light up in addition.

Active Protection

The concept

The Active Protection safety package consists
of systems that are independent of each other:

PreCrash

PostCrash

PreCrash

The concept

With this system critical driving situations that
might result in an accident can be detected
above a speed of approx. 19 mph/30 km/h. In in
these situations, preventative protection meas‐
ures are automatically undertaken to minimize
the risk in the event of an accident as much as
possible.
Critical driving situations may include:

Full application of the brakes.

Severe understeering.

Severe oversteering.

If the vehicle includes the collision warning or
collision warning with braking feature, impend‐

Seite 109

Safety

Controls

109

Online Edition for Part no. 01 40 2 903 880 - 07 12 490

Advertising