Boekel Scientific 134441-2 Dricycler Regenerating Desiccators User Manual

Boekel Scientific Equipment

Advertising
background image

OPERATING INSTRUCTIONS

N2400034, REV 3 06/2014

Boekel Scientific

855 Pennsylvania Blvd.

Feasterville, PA 19053

(T) 215-396-8200
(F) 215-396-8264

DRICYCLER DESICCATORS

MODELS 134041, 134041-2, 134241, 134241-2, 134441 & 134441-2


PRODUCT INFORMATION

Boekel’s Dricycler Desiccators are designed to
eliminate the need to manually change
desiccant on a periodic basis. The Dricycler will
establish and maintain on average, a relative
humidity in the 25% to 35% RH range without
the addition of desiccants. CAUTION: These
Dricycler Desiccators are not intended for the
purpose of maintaining a vacuum or pressure.

UNPACKING

1. Remove the Dricycler from carton.
2. Check to see that the Dricycler

Desiccator was not damaged during
shipment.

3. Retain all packing material in the event

that the unit must be returned.

4. Completely fill out and return the self-

addressed Boekel warranty card.


ASSEMBLY

There is no assembly required for the Dricycler
Desiccator. Simply remove it from the box and
plug it in to an appropriate outlet.

OPERATING INSTRUCTIONS

1. Plug unit into the appropriate power

outlet

2. The green Power indicator light should

immediately go on.

3. The red indicator will occasionally go on

indicating that the regenerating auto dry
process is active.

4. Upon initial start-up, let the Dricycler run

for a period of 24 hours before loading.
This allows stabilization of the unit
chamber.


CLEANING

1. Disengage power cord before performing

any cleaning.

2. The unit interior and exterior may be

cleaned with a damp cloth or sponge and
warm water.

3. If an internal spill occurs swab interior of

unit with a suitable bactericide or
disinfectant.

4. When cleaning the door, use a soft cloth

and water or mild detergent.


NOTE: Abrasive material such as paper towels
may scratch the door or gasket. DO NOT USE
SOLVENTS,

SERVICE: RETURN AUTHORIZATION IS
REQUIRED.

Should service be required, contact your
salesperson or call Boekel Scientific at 215-396-
8200 for return authorization.

SPECIFICATIONS: SMALL DRICYCLERS

DIMENSIONS: 16 1/2” X 12 3/8” X 12 3/8”

SPECIFICATIONS: LARGE DRICYCLERS

DIMENSIONS: 20 1/2” X 22 1/4” X 23”

POWER:

115 VAC (35 W) 134041
115 VAC (35 W) 134241
230 VAC (35 W) 134041-2
230 VAC (35 W) 134241-2
Maximum Temperature: 150°C

POWER:

115 VAC (35 W) 134441
230 VAC (35 W) 134441-2
Maximum Temperature: 150°C

Advertising