Getting started – Boekel Scientific 290300-2 Hot Tubs User Manual
Page 4
N2400260, August 2011, Rev 3 Hot Tub Operators
Manual
4
2. Getting Started
2.1. Unpacking
Remove packing materials carefully, and retain for future shipment or storage
of the unit.
2.2. The Hot Tub package includes:
The Hot Tub
External Power Cord
Polycarbonate Lid
Deffuser, Tray
Operating Instructions
2.3. Installation
Use water only, fill bath to a minimum of 2” above the base of the
tank and the maximum of 1 1/4 “ from the top of the tank when the
bath is fully loaded. A lid or layer of polypropylene spheres must
be used with the bath at temperatures above 60°C. After bath is
filled with water, connect the power line cord to the unit.
The power switch is located on the front panel and is used to turn
the unit on and off.