BoomChair Stealth - 2nd Generation - Manual (Page 7)

7
RECEIVER
TRANSMITTER
WIRELESS KIT CONNECTION TIPS
Fig. 2
Power Switch
Channel
Selector
LED Power
Indicator
Fig. 1
Channel
Selector
Power Port
Audio Port
Battery
Compartment
DAISY CHAINING CHAIRS TOGETHER
Step 1: Connect first BOOMCHAIR ® to any media device using the Direct Connection method as described on page 5.
Step 2: Connect one end of 1/8 in. (3.5mm) AUDIO CORD (2b) into OUTPUT of first BOOMCHAIR ® .
Step 3: Connect other end of 1/8 in. (3.5mm) AUDIO CORD (2b) into INPUT of second BOOMCHAIR ® .
Step 4: Repeat steps 2 and 3 starting from second chair to connect more BOOMCHAIRS ® .
Step 5: Turn all BOOMCHAIRS ® on by turning POWER SWITCH / VOLUME CONTROL clockwise.
Up to 4 BOOMCHAIRS ® can be connected when using the direct connection method.
WIRELESS CONNECTION
DIRECT CONNECTION
Assembly
• Battery Power - Both the WIRELESS TRANSMITTER (W1) and the
WIRELESS RECEIVER (W2) have battery compartments, requiring
4AA batteries each, for a wire free experience.
• Electrical Power - Use provided 5VDC MINI USB POWER ADAPTOR
(W4) and USB TO MINI USB POWER CORD (W7) for power.
WIRELESS TRANSMITTER (W1) can be powered using the 5VDC
MINI USB POWER ADAPTOR (W4). The WIRELESS RECEIVER
(W2) can be powered using the USB TO MINI USB POWER CORD
(W7) by connecting to the USB POWER PORT of your BoomChair ® .
Operation
• Turn WIRELESS TRANSMITTER (W1) and WIRELESS RECEIVER
(W2) On/Off using power switch.
• To operate, switch the channel on the WIRELESS
TRANSMITTER (W1) & WIRELESS RECEIVER (W2) to a
corresponding number of dots using the slider bar (Fig. 1). Confirm
that all cables are securely connected.
If you experience static or poor reception from your wireless connection,
you may need to select the direct connection method to ensure the best
possible sound quality.
Step 1: Connect BOOMCHAIR ® to any media device using the Wireless Method as described on page 6.
Step 2: Repeat Steps 2 through 4 of the Direct Connection method to connect more BOOMCHAIRS ® . OR, if using wirelessly, change the
wirelss switcher number of every BOOMCHAIR ® to the corresponding number of dots on the Transmitter.
Step 3: Turn all BOOMCHAIRS ® on by turning POWER SWITCH / VOLUME CONTROL clockwise.
Up to 4 BOOMCHAIRS ® can be connected using the wireless method.
INPUT OUTPUT INPUT OUTPUT
SECOND CHAIR
Connected to First Chair
FIRST CHAIR:
Connected to Media Device
2b
Media Device