Daisy chaining chairs together, Wireless connection tips, Volume – BoomChair WIFX User Manual

Page 6

Advertising
background image



SECOND CHAIR

DAISY CHAINING CHAIRS TOGETHER

POWER

INPUT

OUTPUT

R

R

L

L

0 3 2 1

BASS/TREBLE

+

VOLUME

+

POWER

INPUT

OUTPUT

R

R

L

L

0 3 2 1

BASS/TREBLE

+

VOLUME

+

Step 1: Connect BoomChair™to any media device as

described on pages 4 or 5. This is the first chair.

Step 2: Connect one end of RCA cord (3b) into RCA

OUTPUT (F) of first BoomChair.™

Step 3: Connect other end of RCA cord (3b) into RCA

INPUT (G) of second BoomChair.™

Step 4: Turn all Boomchairs™ on by turning Power knob

(B) clockwise.

Repeat steps 2 and 3 from second chair to connect more

BoomChairs.™

3b

FIRST CHAIR: Connected to device

Media Device

Up to 8 chairs can be connected using the wireless method. This requires only one transmitter and all chairs switched to wireless mode.

Step 1: Connect Boomchair to any device using the wireless methods described on pages 4 or 5.

Step 2: Set transmitter and all Boomchair™ channel switches (D) to matching frequency.

Step 3: Turn all Boomchairs™ on by turning Power knob (B) clockwise.

Up to 4 chairs can be connected when not using the

wireless feature.

DIRECT CONNECTION

WIRELESS CONNECTION

Should interference occur, switch the channel on the wireless

transmitter using the top slider bar (Fig. 1).

Switch the channel selector on the Boomchair™ (Fig. 2) to the

same channel as the transmitter. The number corresponds

to the number of dots on the transmitter. Select “0” for non-

wireless connections.

Make sure all cables are securely connected.

Make sure batteries are correctly installed in the transmitter,

and that the power is on, as indicated by the red LED (Fig. 3).

If you experience static or poor reception from your wireless

connection, you may need to select the direct connection

method to ensure the best possible sound quality. See page 5.

POWER

INPUT

OUTPUT

R

R

L

L

0 3 2 1

BASS/TREBLE

+

VOLUME

+

WIRELESS CONNECTION TIPS

Fig. 2

Fig. 1

Fig. 3

Power Switch

WARNING:

DO NOT use the adapter for the

chair with this transmitter. It will

permanently damage the transmitter

and void your warranty. Use only

9V - 12V DC, 100 mA - 500 mA

adapter, or visit www.BoomChair.com

to order the proper adapter.

Advertising