Windshield washer fluid, Windshield washer fluid -35, How to check power steering fluid – Buick 2005 Park Avenue User Manual

Page 267: What to use

Advertising
background image

How to Check Power Steering Fluid

To check the power steering fluid, do the following:

1. Turn the key off and let the engine compartment

cool down.

2. Wipe the cap and the top of the reservoir clean.

3. Unscrew the cap and wipe the dipstick with a

clean rag.

4. Replace the cap and completely tighten it.

5. Remove the cap again and look at the fluid level on

the dipstick.

The level should be at the FULL COLD mark. If
necessary, add only enough fluid to bring the level up to
the mark.

What to Use

To determine what kind of fluid to use, see Part D:
Recommended Fluids and Lubricants
on page 6-25.
Always use the proper fluid. Failure to use the proper
fluid can cause leaks and damage hoses and seals.

Windshield Washer Fluid

What to Use

When you need windshield washer fluid, be sure to read
the manufacturer’s instructions before use. If you will
be operating your vehicle in an area where the
temperature may fall below freezing, use a fluid that has
sufficient protection against freezing.

5-35

Advertising