Compaq 64-Bit - Manual (Page 23)

Installing Drivers for Novell NetWare 3-3
Compaq Confidential – Need to Know Required
Writer: Liz M. Weiman Project: MHz Fibre Channel Host Adapter Installation Guide Comments:
Part Number: 122833-002 File Name: d-ch3 Installing Drivers for Novell NetWare.doc Last Saved On: 12/14/00 2:18 PM
a. Mount the CD-ROM as a NetWare volume, enter the path, and then
press Enter. (xxx in the volume name is the SmartStart version
number.)
CPQSMSTxxx:\CPQSUPSW\NSSD
or
b. If the DOS CD-ROM driver support is loaded, enter the path and
press Enter.
<CD-ROM drive letter>:\CPQSUPSW\NSSD
7. Press Enter to bypass the Welcome screen.
8. Select Compaq NWPA Storage Support from the menu by scrolling
down to it, then press F5 to mark the selection.
IMPORTANT: Install the SmartStart and Support Software CD as a package.
9. Press Tab for the Main Menu.
10. Select Install Selected Files by pressing Enter.
11. After viewing the Install Results, press Enter.
12. Select To Reboot Server and follow the on-screen instructions to load
the new or upgraded device drivers on your server. Your
STARTUP.NCF file will be updated automatically with the appropriate
driver load statements.
Additional Information
Readme files containing the latest information about using Compaq options in
a NetWare environment (including driver installation procedures) are included
on the SmartStart and Support Software. These files are located in the
\CPQSUPSW\NSSD directory. To read these help files:
■ Execute README.COM to view and print the STORAGE.RDM help
file.
■ Alternatively, NSSD.HLP, a Microsoft Windows Help File, can be
viewed by double-clicking the NSSD.HLP icon.