Maintenance and storage, Caution, Generator maintenance – Champion Power Equipment 42451 User Manual

Page 15: Spark arrester

Advertising
background image

REV 42451-20140110

12

42451

ENGLISH

MAINTENANCE AND STORAGE

Adjustments

The air-fuel mixture is not adjustable. Tampering with
the governor can damage your generator and your
electrical devices and will void your warranty. CPE
recommends that you contact our service line at
1-877-338-0999 for all other service and/or adjustment
needs.

Use a damp cloth to clean exterior surfaces of the engine.
Use a soft bristle brush to remove dirt and oil.
Use an air compressor (25 PSI) to clear dirt and debris
from the engine.

Cleaning

DO NOT spray engine with water.

CAUTION

Water can contaminate the fuel system.

Generator Maintenance

Make certain that the generator is kept clean and stored
properly. Only operate the unit on a flat, level surface in
a clean, dry operating environment. DO NOT expose the
unit to extreme conditions, excessive dust, dirt, moisture
or corrosive vapors.

Use a damp cloth to clean exterior surfaces of the generator.
Use a soft bristle brush to remove dirt and oil.
Use an air compressor (25 PSI) to clear dirt and debris
from the generator.
Inspect all air vents and cooling slots to ensure that they
are clean and unobstructed.

DO NOT use a garden hose to clean the generator.

Water can enter the generator through the cooling
slots and damage the generator windings.

CAUTION

Maintenance Schedule

Follow the service intervals indicated in the following
maintenance schedule.
Service your generator more frequently when operating
in adverse conditions.
Contact our help line at

1-877-338-0999 to locate the

nearest Champion Power Equipment certified service
dealer for your generator or engine maintenance needs.

*To be performed by knowledgeable, experienced owners or
Champion Power Equipment certified dealers.

Spark Arrester

1. Allow the engine to cool completely before servicing

the spark arrester.

2. Remove the two screws holding the cover plate which

retains the end of the spark arrester to the muffler.

3. Remove the spark arrester screen.
4. Carefully remove the carbon deposits from the spark

arrester screen with a wire brush.

5. Replace the spark arrester if it is damaged.
6. Position the spark arrester in the muffler and attach

the cover plate with the two screws.

Failure to clean the spark arrester will result in
degraded engine performance.

CAUTION

Every 8 hours or daily

Check oil level

Clean around air intake and muffler

First 5 Hours

Change oil

Every 50 hours or every season

Clean air filter
Change oil if operating under heavy load or in hot
environments

Every 100 hours or every season

Change oil
Clean/Adjust spark plug
Check/Adjust valve clearance*

Clean spark arrester

Clean fuel tank and filter*

Every 3 years

Replace fuel line

Advertising