Champion Power Equipment 100156 - Manual (Page 19)

16
100156 ENGLISH
Oil
Use 10W-30 automotive oil.
Oil capacity is up to 0.6 L (0.6 qt.).
DO NOT OVERFILL
Please reference the following chart for recommended
oil types for use in the generator.
Fuel
Fuel capacity is 1.6 gal. (6 L). Use regular unleaded
gasoline with a minimum octane rating of 85 and an
ethanol content of less than 10% by volume.
SPECIFICATIONS
Maintenance Valve Clearance
– Intake: 0.06 - 0.12 mm (0.002 - 0.005 in.)
– Exhaust: 0.08 - 0.14 mm (0.003 - 0.006 in.)
Note: Tech bulletin regarding the valve adjustment
procedure is on www.championpowerequipment.com.
Generator Specifications
– Model 100156
– Rated Load 2800 Watts
– Maximum Load 3100 Watts
– AC Load 120 V
– Phase Single
– Frequency 60 Hz
– Fuel Capacity 1.6 gal. (6 L)
– Gross Weight 96.3 lb. (43.7 kg)
– Net Weight 83.1 lb. (37.7 kg)
– Height 18.3 in. (46.4 cm)
– Width 17.3 in. (44 cm)
– Length 22.4 in. (57 cm)
Engine Specifications
– Model YF166FD-331
– Displacement 171cc
– Type 4-Stroke OHV
– Start Type Recoil
Spark Plugs
OEM spark plug: NHSP F6RTC
Replacement spark plug: NGK BPR6ES or equivalent
Make certain the spark plug gap is 0.7 - 0.8 mm or
(0.028 - 0.031 in.).
An Important Message About Temperature
Your Champion Power Equipment product is designed
and rated for continuous operation at ambient
temperatures up to 40°C (104°F). When your product is
needed your product may be operated at temperatures
ranging from -15°C (5°F) to 50°C (122°F) for short
periods. If the product is exposed to temperatures
outside this range during storage, it should be brought
back within this range before operation. In any event,
the product must always be operated outdoors, in a
well-ventilated area and away from doors, windows and
other vents.
Weather will affect engine oil and engine
performance. Change the type of engine oil used
based on weather conditions to suit the engine
needs.
NOTE
Full Synthetic 5W-30
Degrees Celsiusº (Outside)
(Outside) Degrees Fahrenheitº