Operation, Stopping the engine, 12v dc outlet – Champion Power Equipment 73534i User Manual

Page 14: 12v dc outlet – battery charging

Advertising
background image

11

REV 73534i-20131219

ENGLISH

73534i

OPERATION

Stopping the Engine

1. Turn off and unplug all electrical loads. Never start

or stop the generator with electrical devices plugged
in or turned on.

2. Let the generator run at no-load for several minutes

to stabilize internal temperatures of the engine and
generator.

3. Turn the Fuel Valve to the “OFF” position.
4. Let the engine run until fuel starvation has stopped

the engine. This usually takes a few minutes.

5. Turn the engine switch to the “Off” position.
6. Allow the generator to cool down completely to room

temperature

7. Turn the fuel cap lever vent to the “Off” position

after the generator has cooled down completely.

Important: Always ensure that the Fuel Valve and the
Engine Switch are in the “OFF” position when the
engine is not in use.

12V DC Outlet

The 12V DC outlet can be used with the supplied charge
cable and USB charger and other commercially available
12V DC automotive style plugs. The DC output is
unregulated and can damage some products. Confirm
your accessory input voltage range is at least 12-21V
DC. When using the DC outlet turn the Economy mode
switch to the “OFF” position.

12V DC Outlet – Battery Charging

1. Before connecting the battery charging cable to a

battery that is installed in a vehicle, disconnect the
vehicle battery ground cable from the negative (–)
battery terminal.

2. Plug the battery charging cable into the 12V DC

receptacle of the generator.

3. Connect the red (+) battery charger lead to the red

(+) battery terminal.

4. Connect the black (–) battery charger lead to the

black (–) battery terminal.

5. Start the generator.
Important: The 12V DC outlet is ONLY to be used with
the supplied 12V DC battery charging cable. The 12V
DC output is unregulated and will damage other 12V
DC products. When using the 12V DC outlet, turn the
Economy mode switch to the “OFF” position. Be sure all
electric devices including the lines and plug connections
are in good condition before connection to the generator.

If the engine will not be used for a period of two (2)
weeks or longer, please see the storage section for
proper engine and fuel storage.

NOTE

Advertising