Champion Power Equipment 73535i - Manual (Page 18)

15
REV 73535i-20130307
ENGLISH 73535i
fuel
Fuel capacity is 1.0 gal. (3.8 L). Use regular unleaded
gasoline with a minimum octane rating of 85 and an
ethanol content of less than 10% by volume.
SPECIfICATIONS
Maintenance Valve Clearance
– Intake: 0.10 mm (0.004 in.)
– Exhaust: 0.10 mm (0.004 in.)
Note: Tech bulletin regarding the valve adjustment
procedure is on www.championpowerequipment.com.
Spark Plugs
OEM spark plug: NHSP E6RTC
Replacement spark plug: NGK BPR6HS or equivalent
Make certain the spark plug gap is 0.6 - 0.7 mm or
(0.024 - 0.028 in.).
Generator Specifications
– Model 73535i
– Rated Load 1600 Watts
– Maximum Load 2000 Watts
– AC Load 120 V
– Phase Single
– Frequency 60 Hz
– Fuel Capacity 1.0 gal. (3.8 L)
– Gross Weight 51.1 lbs (23.2 kg)
– Net Weight 47.2 lbs (21.4 kg)
– Height 16.3 inches (41.5 cm)
– Width 13.2 inches (33.5 cm)
– Length 19.3 inches (49 cm)
Engine Specifications
– Model YF149FD-330
– Displacement 80cc
– Type 4-Stroke OHV
– Start Type Recoil
Oil
Use 10W-30 automotive oil.
Oil capacity is 0.4 L (0.42 qt.).
DO NOT OVERFILL.
Please reference the following chart for recommended
oil types for use in the generator.
IC Warning
This device complies with Industry Canada licence-
exempt RSS standard(s).
Operation is subject to the following two conditions
(1) This device may not cause interference, and
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
An Important Message About Temperature
Your Champion Power Equipment product is designed
and rated for continuous operation at ambient
temperatures up to 40°C (104°F). When your product is
needed your product may be operated at temperatures
ranging from -15°C (5°F) to 50°C (122°F) for short
periods. If the product is exposed to temperatures
outside this range during storage, it should be brought
back within this range before operation. In any event,
the product must always be operated outdoors, in a
well-ventilated area and away from doors, windows and
other vents.
US Patent # D656897, 8391012