Champion Power Equipment 12090 - Manual (Page 10)

7
REV 12090-20140108
ENGLISH 12090
asseMbly
Do not place the battery cables near any
moving or rotating parts, heat, or water .
WaRnInG
Make sure the battery cables are tied up at all
times and are not left to “dangle” or hang .
CaUTIon
battery Connections
When working with batteries always make sure
to use eye protection, gloves and safety gear,
and never lean directly over the battery .
WaRnInG
Use only a 12V automotive or equivalent
battery to supply power to the winch .
WaRnInG
Never use or connect the battery cables or
winch to a damaged battery or one with signs
of corrosion .
DanGeR
Never use the winch if it does not have a safe
and proper ground . Any metal that is coated
or painted is not a proper ground .
DanGeR
Before wiring the winch to any battery powered
source, please heed these safety warnings .
Do not use adapter plate and/or winch to tow
any vehicle, boat or other object .
WaRnInG
Before attaching winch to the adapter plate,
make sure all bolts and nuts on the plate are
tightened and secure .
WaRnInG
adapter Plate
The adapter plate can be used to temporarily
mount the winch to any 2 in . (5,1 cm) ball hitch
receiver .
1 . Align the keyslot holes on the bottom of the
winch over the mounting bolts already on the
adapter plate . (A)
2 . Place the winch onto the adapter plate,
keyslot holes over the bolts and then slide the
plate until the winch is secure on the bolts .
(B)
3 . Place the adapter plate hole over any 2 in .
(5 .1 cm) ball hitch, making sure it is secure .
b a